Hemera board
Features
- Based on STMicroelectronics
- Exporting 60 fps images to LCD displays through NB1001 possible
- Can be connected directly to NB1001 Module and be shown on the LCD display
- NB picture conveter compatible for picture output with all types of DVP signal sensor
- Process update through S-TLINK
- RAW data exports compatible
Description
Hemera motherboards are developed based on STMicroelectronics automatic STM3254 MCU chip, which are compatible with NB CMOS series, including standard module, EVB board, client-customized board, to connect to LCD display or computer-end displays. The boards can also work with NB CMOS Sensor module to run UART, SPI, IIC etc. communcations extension features.
| Board | Connector | Interface | UI | V1.0 | User Guide |
|---|---|---|---|---|---|
|
30 Pin FPC Interface output connector |
|
Switch Buttons,LCD | V1.0 |
Download |
38 board
Features
- Can detect individually and the functional system board has object identification abilities
- Tailor-made for tiny or special devices which could be placed in a limited room
- SPI Flash enables programmatic updates at anytime
- Pre-installed 940IR light enable detection in dark enviornments
- Pre-installed Speech IC enables personalized speaking
Description
38 boards are specifically designed to process all object detection in dark enviornments through NB1001 light beam detection with the pre-installed PWM-driven automatic IR light. The boards also support personalized speaking with the systematical SPI Flash processing, which could meet different application needs with a single design.
| Board | Connector | Interface | UI | Version | User Guide |
|---|---|---|---|---|---|
|
30 Pin FPC Interface output connector |
|
Switch Buttons,LED | V1.0 |
Download |
JABBERBOARD
Features
- A function-independent system with detection and recognition capability
- Designed for physically small installations
- Comes complete with SPI Flash for flexible programmability
- Status LED and G sensor available for different operating scenarios
Description
Jabber board is developed for quick integration into any kind of existing device which requires an upgrade to interactivity or smart operation. It offers a production-ready camera module interface within a small size. The onboard status LED and G sensor also provide trigger messages to both the user and the device itself. The target detection object can be programmed via the SPI flash and the same design can easily be implemented into different kinds of applications.
| Board | Connector | Interface | UI | User Guide |
|---|---|---|---|---|
|
32 Pin FPC type |
|
Switch buttons,LED,G Sensor |
Download |
EVALBOARD
Features
- A flexible evaluation board for engineering / development use.
- Text buttons and switches can switch between different engineering modes
- Reserved expansion GPIO enable the evaluation of additional functions
- Real time readout UART provides support for verification and debug
- Compatible with NB1001 Camera module for rapid development
Description
Evaluation board is designed for engineering development purposes with a small system board which gives sufficient GPIOs for debug purposes. It is defined as a simulation system board for different function requirements. The developer could use it for early stage prototyping and working sample development. Once coding has been fine tuned and optimized using this engineering board, the production board can use the same verified code enabling the developer to proceed with functional verification with minimum additional effort.
| Board | Connector | Interface | UI | User Guide |
|---|---|---|---|---|
|
32 Pin FPC type |
|
Switch buttons,LED,G Sensor |
Download |
